Tietz Video and Image Processing Systems GmbH

	F114/F114T \| F214/F214T

Fast Scan CCD camera (2k, 14 µm, 14 bit, optional 2:1 taper)
FastScan-214 is a 2k x 2k TVIPS bottom mounted, on-axis camera with an active area of 28 mm x 28 mm. It is the perfect solution for demanding applications in biology and materials science. With its built-in mechanical shutter, the full frame CCD can be operated in a 2k x 1k frame transfer mode to facilitate a frame rate of up to 8 frames/sec. Using the optional 2:1 taper optics, FastScan-214 offers an outstanding active area of 60 mm x 60 mm. A high quality 14 bit analog-to-digital converter makes this camera an excellent solution for all types of applications, requiring high dynamic range. Download product info (PDF, 2,5 MB)

			CCD cooling						Fiber optical coupling

			For optimum performance, the Peltiercooled CCD chip (regulated at -15°C) is located in a vacuum housing separated from the microscope vacuum. The scintillator surface is kept close to room temperature. This design avoids contamination and allows venting the camera chamber without turning off the CCD camera.						Fiber optical coupling of the electronsensitive layer (scintillator) with the CCD sensor increases the amount of light collected in comparison with lens-optical coupling and, as a result, the sensitivity of the camera.

			Optimized scintillators						Camera rotation

			TVIPS optimizes the scintillator for individual demands. Resolution and sensitivity can be customized for high tensions from 100 to 400 kV. Two standard types are available: optimized for high resolution (HR) or for high sensitivity (HS).						The camera can be freely rotated in order to align it to the specimen feature or the tilt axis of the goniometer.

SPECIFICATIONS	FastScan-F214	-F214T
CCD type (architecture)	Full frame

CCD format (pixels)	2048 x 2048

CCD pixel size (μm)	14 x 14

Field of view (mm)	28,6 x 28,6	60,2 x 60,2

Readout rate @ digitization	10 Mpixel/sec @ 14 bit

Frame rate at full resolution	2-3 frames/sec

Frame rate at 2 x binning	7-8 frames/sec (image size 1024 x 512 pixels)

Post-magnification	1.1 x - 1.5 x

Electron-optical coupling	1:1 fiber-optics	2:1 taper

Scintillator type	Polycrystalline phosphor

CCD cooling	< -15˚C, regulated

CCD binnig factors	1 x, 2 x

Gain factors (analog)	1 x

Full well capacity (CCD electrons)*	230 000

Dynamic range*	7 500:1 (maximum/noise)**

Non-linearity*	< 1 %

Sensitivity for primary electrons (120 kVscintillator)*	8 counts	4 counts

SNR (for a single 120 keV electrons)*	3.0	1.5

Resolution (NTF at Nyquist freq.)*	> 10 %	> 14 %

Anti-blooming	yes

Bottom mounted	on-axis, rotatable

System requirements	Windows 2000 / XP, Firewire

Options	EM-Menu Image Processing software, Tomography, motorized beamstop

* Typical values** Estimated