 |
|||
|
|||
|
|||
|
|||
|
|||
|
|||
|
Applications |
||
|
|||
|
|||
|
Support |
||
|
|||
|
|||
|
About Us |
||
|
|||
|
|||
 |
|
 |
|
| Slow scan CCD camera (2k, 24 μm, 16 bit) | |
TemCam-F224HD is a 2k x 2k TVIPS camera with an active area of 49 mm x 49 mm. It is the perfect solution for applications in material science and biology, requiring maximum dynamic range and ultimate low dose capabilities. |
 |
Download product info (PDF, 2,5 MB)
|
|
Large pixel size | |
|
Fiber optical coupling | |||||
|
|
|
|
|
|
|
|
|
||
|
|
The active pixel area of a 24 μm pixel is 2.9 x larger than a 14 μm pixel resulting in a higher full well capacity of the CCD chip and hence extending the dynamic range. Also, the resolution of a 24 μm pixel camera is improved in comparison to a 14 μm pixel camera with the same number of pixels. | |
|
Fiber optical coupling of the electronsensitive layer (scintillator) with the CCD sensor increases the amount of light collected in comparison with lens-optical coupling and, as a result, the sensitivity of the camera. | |||||
|
|
Optimized scintillators | |
|
Near-axis flange | |||||
|
|
|
|
|
|
|
|
|
||
|
|
TVIPS optimizes the scintillator for individual demands. Resolution and sensitivity can be customized for high tensions from 100 to 400 kV. Two standard types are available: optimized for high resolution (HR) or for high sensitivity (HS). | |
|
TVIPS has designed a special flange which combines TemCam-F224HD with FastScan-114NX, a high quality fiber-optically coupled CCD camera operating at video rate. Due to disadvantages of side-mounted cameras this is an interesting option to monitor the TEM image and its FFT in realtime, for the main purpose of alignment, demonstration or low dose search. | |||||
SPECIFICATIONS
|
TemCam-F224HD | ||
| CCD type (architecture) | Full frame | ||
|
|
|
|
| CCD format (pixels) | 2048 x 2048 | ||
|
|
|
|
| CCD pixel size (μm) | 24 x 24 | ||
|
|
|
|
| Field of view (mm) | 49.2 x 49.2 | ||
|
|
|
|
| Readout rate @ digitization | 1 Mpixel @ 16 bit | ||
|
|
|
|
| Frame rate at full resolution | 0.2 (5 secs) | ||
|
|
|
|
| Frame rate at 2 x binning | 0.6 frames/sec | ||
|
|
|
|
| Post-magnification | 1.4 x - 1.7 x | ||
|
|
|
|
| Electron-optical coupling | 1:1 fiber-optics | ||
|
|
|
|
| Scintillator type | Polycrystalline phosphor | ||
|
|
|
|
| CCD cooling | < -25˚ C, regulated | ||
|
|
|
|
| CCD binnig factors | 1 x, 2 x, 4 x, 8 x | ||
|
|
|
|
| Gain factors (analog) | 1 x, 2 x, 4 x | ||
|
|
|
|
| Full well capacity (CCD electrons)* | 570 000 | ||
|
|
|
|
| Dynamic range* | 25 000:1 (maximum/noise)** | ||
|
|
|
|
| Non-linearity* | < 1% | ||
|
|
|
|
| Sensitivity for primary electrons (120 kV scintillator)* | 100 counts*** | ||
|
|
|
|
| SNR (for a single 120 keV electrons)* | > 12 | ||
|
|
|
|
| Resolution (NTF at Nyquist freq.)* | > 22 % | ||
|
|
|
|
| Anti-blooming | yes | ||
|
|
|
|
| Bottom mounted | On-axis | ||
|
|
|
|
| System requirements | Windows 2000 / XP, PCI interface | ||
|
|
|
|
| Options | FastScan-114NX in near-axis position, motorized beam stop | ||
|
|
|
|
| * Typical values** Estimated*** Gain 4x |
|||
Products |
Careers |
Support |
Applications |
News |
CCD Glossary |
Home |
Top of page
© TVIPS GmbH 1998 - 2008