 |
|||
|
|||
|
|||
|
|||
|
|||
|
|||
|
Applications |
||
|
|||
|
|||
|
Support |
||
|
|||
|
|||
|
About Us |
||
|
|||
|
|||
 |
|
 |
|
| World’s Highest Resolution Camera for TEMs (8k,16 μm,14 bit) | |
TemCam-F816 is the first digital camera with a larger recording area than film. With its impressive area of 128 mm x 128 mm and ultra-high resolution of 8192 x 8192 pixels the F816 surpasses the performance of film. It is the ultimate solution for applications in material science and biology. |
 |
Download product info (PDF, 2,5 MB)
|
|
Large field of view | |
|
Fast readout | |||||
|
|
|
|
|
|
|
|
|
||
|
|
The active area of 128 x 128 mm is about 2x larger than the standard film areas of 100 x 80 mm. | |
|
Eight readout ports, each sampling with 10 MPixels, digitize the image information and transfer the data into the PC memory within 5 secs. With a subarea of 2k x 2k, a frame rate of 1.5 fps can be achieved. | |||||
|
|
Fiber optic coupling | |
|
Optimized scintillators | |||||
|
|
|
|
|
|
|
|
|
||
|
|
Fiber optic coupling of the electronsensitive layer (scintillator) with the sensor increases the amount of light collected in comparison with lensoptical coupling and, as a result, the sensitivity of the camera. | |
|
TVIPS optimizes the scintillator for
individual demands. Resolution and
sensitivity can be customized for high
tensions from 100 to 400 kV.
Two standard types are available: optimized for high resolution (HR) or for high sensitivity (HS). |
|||||
SPECIFICATIONS
|
TemCam-F816 | ||
| Format (pixels) | 8192 x 8192 | ||
|
|
|
|
| Pixel size (μm) | 15.6 x 15.6 | ||
|
|
|
|
| Field of view (mm) | 128 x 128 | ||
|
|
|
|
| Read rate @ digitization | 8 x 10 MPixel @ 14 bit | ||
|
|
|
|
| Frame rate at full resolution | 0.2 fps (5 secs) | ||
|
|
|
|
| Frame rate at 8k x 8k (2x binning) | 0.33 fps (3 secs) | ||
|
|
|
|
| Frame rate at 2k x 2k | 1.5 fps (0.75 secs) | ||
|
|
|
|
| Post-magnification | ~ 1.6x | ||
|
|
|
|
| Electron-optical coupling | 1:1 fiber-optics | ||
|
|
|
|
| Scintillator type | Polycrystalline phosphor | ||
|
|
|
|
| Binning factors | 1x, 2x, 4x | ||
|
|
|
|
| Gain factors (analog) | 1x | ||
|
|
|
|
| Cooling* | -18°C, regulated | ||
|
|
|
|
| Dynamic range* | 10:000 : 1 (maximum/noise) | ||
|
|
|
|
| Non-linearity* | < 1% (after flatfield correction) | ||
|
|
|
|
| Sensitivity for primary 200 keV electrons* | 10 counts | ||
|
|
|
|
| SNR (for a single 200 keV electron)* | 8:1 | ||
|
|
|
|
| Resolution (NTF at Nyquist freq.)* | 12% | ||
|
|
|
|
| Anti-blooming | yes | ||
|
|
|
|
| Bottom mounted | On-axis | ||
|
|
|
|
| System requirements | Windows XP, Intel DualCore CPU, 4 GB RAM, PCI and Firewire interfaces | ||
|
|
|
|
| Software | EM-Menu 4.0, EM-Tomo 4.0 | ||
|
|
|
|
| * Typical values | |||
Products |
Careers |
Support |
Applications |
News |
CCD Glossary |
Home |
Top of page
© TVIPS GmbH 1998 - 2007